See What Saab 9-3 Key Replacement Tricks The Celebs Are Utilizing

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a distinct set of steps to add another key. It requires dealer assistance using a handheld computer dubbed Tech-2. Then a new key as well as transponder need to be bought and then programmed into the car.

Rotate your keys to stop one from wearing out quicker than the next. This will also keep your keys in pristine condition.

Replacement Case

Unlike the classic Saab keys of old keys, the new key fobs contain electronics which makes it more difficult to duplicate. This has made theft of cars much more difficult than twenty years ago. But, it has also made the replacement of lost keys a much more costly endeavor.

Every owner of a Saab 9-3 must have at least two working keys. If one is lost it costs a lot to purchase a new one for the vehicle because it requires replacing the CIM module and programming the locking cylinders. Dealers charge between $100-$200 for this.

There are options to avoid the high cost. Some parts suppliers will search for the code on an old key (usually the same one that opens the doors and turns off the ignition) and cut a brand new key blade from metal for just a fraction of dealer cost. The key must be exactly the same as the original for it to function in your vehicle.

You can also change the case yourself by following these steps. You’ll need a flathead screwdriver as well as some patience. With the screwdriver you can pull apart the plastic and remove the emergency key. Once you have the case open, remove the electronics and place them inside the new case. Make sure you put the correct badge and key back inside the case, too.

Replacement Battery

The replacement battery for the Saab 9-3 is an affordable part that can be replaced easily and quickly. Cyclone’s YouTube video Cyd demonstrates the procedure for replacing the remote fob battery with just four simple steps. This tutorial should work with any modern Saab key fob. However, the process may differ slightly.

This button is usually placed close to the Saab 9-3 Key Replacement logo on the back of the fob. It is usually located close to the Saab logo on the back of the fob. Next take an screwdriver with a flat head to insert into the tiny hole in this button. This should be enough to open the case of the fob so that you can replace the battery.

After the new battery CR1632 is in place it is possible to reassemble the remote key fob and program it to your car. The entire process should not exceed an hour. It’s a very easy process that does not require any special equipment.

The procedure is a little more complex if you lose your key, but it’s possible. The dealer has to first verify the VIN of the vehicle before requesting an additional TWICE module and key blade that is matched to the unique code. The dealer will then need to program the key using MDI, a new software tool.

replacement key for saab 93 Key Fob

The key fob is equipped with a battery that is used to lock and unlock your car. The batteries have a lifespan that is a long time, and they eventually expire. This is a problem that occurs with all cars. The good news is that you can change the batteries in most key fobs, and not have to replace the entire case. You can buy fobs replacements on Amazon that have all the electronics already installed, so you can simply open the case and replace those batteries that are old. It’s important to note that you will need to remove the emergency key first, and you can do this by inserting a small flathead screwdriver into the slot located in the middle of the case. The case will split when you rotate the screwdriver around it.

When you are ready to replace the keys, ensure you have a spare, as this can reduce your total cost by a significant amount. If you have an additional key, ask the dealer to cut it in half and program it to your car. This is much less expensive than purchasing a new key fob.

If you do not have a spare key you can add an additional key to your car, but it requires a lot of research and effort. It costs around a hundred bucks to add an additional car key. The computer in the vehicle must also be programmed. This can be accomplished by a professional, however it’s a costly choice for most owners.

Replacement Ignition

Unlike the earlier Saab vehicles, the latest SAAB 9-3 models use an upgraded alarm system that is dependent on a coded keys. This means that when you lose your sole working key, adding another one could be very expensive because the car needs to have a specific computer module added and it must also be designed to accept a different key. Even dealers can charge hundreds of dollars to program the new key in the event that they are unable to do it.

If you’ve lost the only working key, a dealer will replace the computer in your car (known as the CIM or saab key fob replacement TWICE) to make an exchange, and they will charge you a premium price for it. We can reprogram the existing EEPROM in your car computer to make it ready for an additional key. This will save you more than 50% on what you would have to pay the dealer.

If you’ve been a long-time owner of a 03-11 SAAB 9-3, you likely realize that the ignition key isn’t the most durable. They can become extremely sticky and the buttons are known to fall off occasionally which is why you should think about buying a new one if the one you have isn’t functioning properly. It’s not as difficult as it appears to replace the ignition key. With the appropriate tools, it could be accomplished in a matter of minutes.