See What In Wall Fireplace Tricks The Celebs Are Making Use Of

In Wall Fireplace – How to Choose the Right Height and Depth for Your Fireplace

An in wall fireplace provides an elegant and polished look without the cost of mantles. It is among the most simple electric fireplaces to install.

There are a few aspects to think about before purchasing an in-wall fireplace (have a peek at this website). Follow these guidelines to get the most of your investment.

Height

It may seem like an easy question however, determining the height of your fireplace is one of the most important decisions you’ll make. The height of your fireplace can affect everything from how it fits in a room to its visibility. The fireplace might appear strange if it is raised too high. It could also take away from its attractiveness. A fireplace that is too low will be lost within the wall space.

Luckily electric fireplaces are able enough to be installed at a variety of heights. The majority of people place their fireplaces sitting at eye level. This requires a height between 40-42 inches. Others mount their fireplaces underneath their TVs, which can be a visually appealing option.

The exact size of your fireplace will depend on several factors, including the dimensions of the room as well as the length of the wall you’d like to put it. The larger the space is, the bigger it will be. This could mean that you’re in a position to fit a bigger fireplace into it. This is also true for the length of the wall, since a longer wall can support a wider fireplace.

How you intend to utilize your fireplace is an important factor. If you intend to use it for decorative purposes, a smaller size will be the best. If you intend to heat your home with it, you’ll need to ensure that the fireplace is tall enough to meet the safety and codes of your area.

It is important to choose the appropriate size for your fireplace to ensure that it is in line with your decor and is easy to clean or fill. If you’re unsure of the height to go with it is always a good idea to reach out to an experienced fireplace installer for assistance. They can suggest the best height for your fireplace, based on their knowledge and your home’s layout.

Depth

A fireplace‘s depth is important to know if you want to install it in a recessed position. If you are going to cut through your wall, make sure that you have enough space to accommodate the inner design of your fireplace (the smoke shelf that is above the fireplace, the flue that runs through the roof, and the fireplace itself). You should also consider the space you’ll need for the surround and whether you’d like a mantle.

Many of the latest electric fireplaces have a depth that is nearly concealed, giving them the appearance of a “built-in” look. The Panorama BI-Deep series is an excellent example of this kind of wall-mounted electric fireplace. This model has a 5.8-inch depth that lets the viewer view the flames and ember bed, and not the frame. It also comes with a variety of media packages, such as natural-looking driftwood logs white pebbles, clear glass crystals that reflect the flames and improve the ember bed.

Wall-mounted gas fireplaces are also available in shallow and deep models. However, when deciding on the depth of your fireplace, it is crucial to remember that these fireplaces function as a supplemental heat source and must be properly vented by a skilled professional. The length of the vent pipe, the size of the flue and the distance from the stove to the vent are all factors that must be considered when determining the depth of a gas fireplace.

If you decide to go with a surface mount or a recess-mounted installation, it is crucial to read and follow all of the instructions of the manufacturer when mounting your fireplace. A professional installer is recommended in all instances. It is also a good idea to have a second person on hand for the installation of a fireplace.

Adding an in-wall fireplace to your home is an excellent way to increase its value and also add ambiance to your living spaces. It can also reduce your heating expenses. It’s an excellent option for those who are unable to install an old-fashioned fireplace into your home due to space limitations or because of the location of the chimney.

Surface Mount

If you’re unable, or prefer not to cut into your wall or create an area to accommodate an electric fireplace, a surface mount gives a sleek and modern look. Certain models, such as the Allusion line of electric fireplaces, can be positioned partially recessed into a wall without compromising the output of heat.

To begin the installation, mark the wall with a pencil on the wall where the bracket is to be placed. Utilize a stud locater to locate the studs in the area, and ensure that the mounting bracket is placed in the front of one or more studs to ensure stability. If a stud can’t be reached or is not suitable for your fireplace, make use of drywall anchors for support.

After you have marked the location of mounting brackets on the wall and then use a power drill to install them, making sure they are in alignment with the studs. If possible, connect each bracket to a stud for strength and stability, however you can also use plastic anchors if necessary. Once the mounting brackets have been put in place, lift your fireplace, then hang it from the wall bracket. Once it’s secure, check the position of your fireplace to ensure that it’s straight and not crooked within the opening.

Before you begin the installation make sure to plug in your fireplace and ensure that all features work correctly. Light the fire, play around with the heating, the ember bed lights and other features. Once you’re happy with the results, it’s time to install your floating mantel.

Depending on the model of your fireplace, you’ll have to connect the wire connection to the appliance wire connector in the bottom of the mantel or if the fireplace has slots or hooks on the back, connect them to the slots on the wall mounting brackets. After you’ve completed this, follow your fireplace’s owner’s manual for specific instructions for removing the glass front panel and putting it back inside the opening.

Once you’ve removed your front panel of your fireplace and placed it in its opening, follow the guideline to complete the installation by replacing the glass front and adjusting the height if necessary. If your fireplace is equipped with ember bed media, spread it across the top of the grate to give it a a more natural appearance and then secure it using the screws included.

Plug-In

Unlike traditional wood-burning fireplaces, these electric versions don’t need chimneys or vents. They’re plugged into a standard outlet that can provide supplemental heat for rooms up 400 square feet. You can also alter the ambience with a variety of settings for flame and heat. Some models come with LED lighting effects that enhance the fire and ember bed. Others include a top grille grate that hides manual controls but easily can be opened to reveal buttons to set the desired setting.

Electric fire places with plug-ins can be installed directly on the wall or recessed for an appearance of a built-in. They are generally simpler to install than mantel fireplaces. Some have pedestal bases to permit you to put the fireplace on a flat surface, such as buffets or dressers. A remote control along with mounting hardware and a log set are all included. Depending on the model, electric fireplaces can include flame and Electric Firesuite heat options that can be switched off for year-round ambiance.

Certain models come with privacy glass which can be changed in a flash from completely transparent to partially transparent. These types are ideal for walls that divide entertainment areas like dining and living rooms. They can even be used in bedrooms where adding a fireplace is a cost-effective way to cool a room without sacrificing privacy.

Plug-in electric fire places do not need to be hardwired however they must be installed in a wall capable of supporting their weight. Some models include a kit to make this process easier with a pre-wired power cord as well as an specialized mounting bracket. This kit can be used for drywall installation or concrete installation.

If you decide to install your electric fireplace on the wall make sure it is located near an outlet. Based on the model that you choose, plug-in electric fireplaces may be connected to outlets that are on the same circuit or a separate one for your electric fireplace. It’s best to use an exclusive circuit to ensure that no other appliances in the home will run at the same voltage, and possibly trip your circuit breaker.