How To Determine If You’re In The Right Place For Autowatch Ghost Immobiliser Fitting

Ghost Immobiliser Installation

Add a ghost immobiliser to your vehicle to protect it from thieves. Our TASSA-certified system is safe from hacking, key cloning, and also vehicle immobiliser bypass.

The system is hidden within the wiring loom of your vehicle and is invisible to anyone who looks. It works by generating pin code push sequences by using buttons already present on the steering wheel, door cards, and the centre console.

No circuit cuts

A car is a valuable possession that you spend years of hard work to acquire, so it’s understandable why owners want to safeguard their vehicle from theft. However, traditional security devices such as alarms and wheel locks can easily be cut off or taken over by thieves. ghost Autowatch immobiliser immobilisers are highly-effective solution that operates silently and isn’t detected by modern thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network of your vehicle to disable the engine without the use of radio frequencies or key fobs. It communicates with your vehicle’s ECU via buttons already on the steering wheel, dash, and door panels, to create an unique pin code that only you know. The code can be changed at any time and can have up to 20 digits depending on your preference. It also has an emergency code that you could use in the event of forgetting your PIN.

The ghost immobiliser is also helpful to prevent the relay box inside your home from transmitting the signal of your car key, which will open the doors and start your vehicle. It could even block advanced methods of stealing your vehicle, such as OBD port hacking. The device is small, weatherproof and difficult to see. It’s also hard to tamper.

The ghost immobiliser also has an advantage: it is able to be installed in your vehicle without leaving permanent marks. This makes it perfect for those who are planning to sell their car in the future. It’s also much more efficient and less time-consuming to install than an original factory-fitted system.

The Autowatch ghost 2 immobiliser cost, a revolutionary new generation device, stops thefts of cars using contactless technology by connecting to a vehicle’s CAN network and using the existing buttons to generate a unique PIN code. This is a stealthy device that can be put in with no wires cut and doesn’t require any additional key fobs. It also connects to the original ECU of the vehicle, preventing thieves bypassing it with a new key. This system is TASSA-certified and is compatible with an International Security Register. Owners can rest assured, knowing that their vehicles are protected from theft.

No scanning with RF

You’ll want to safeguard your vehicle from theft if have spent an enormous amount of money and spent a lot of time customizing it. One way to accomplish this is to install an immobiliser, which will prevent your engine from starting unless you enter a unique PIN. Using the buttons on your steering wheel and dashboard, you can create a PIN up to 20 digits long which is only known to you, and ensure that only you have access to your vehicle. It is also possible to set up a service and valet mode, which will allow you to start your car temporarily without having to enter the PIN code. This will permit technicians to work on your vehicle without you being present. This feature is ideal for people who want to cut down on time and make their lives easier.

Ghost immobilisers, which are new generation device connects to the CAN data network of your vehicle and uses the buttons on the dashboard as well as the steering wheel to set a PIN number. It is designed to blend into with the rest of your vehicle, since it doesn’t emit any sound or light indicator. It can be put in anywhere on your vehicle without affecting the aesthetics.

This stealthy device is approved by TASSA and can reduce your insurance costs. It has a tracking feature that allows you to locate your vehicle even if it’s stolen. This is especially useful if you own a rare, expensive vehicle that you’ve put time and effort to customize.

autowatch ghost installation walsall Ghost, in conjunction with the iPhone app, allows you to remotely start your vehicle if you have forgotten your PIN code or are unable to access your vehicle. This feature is great for those who need to collect your kids or run errands but don’t want the safety of someone else driving your car. It’s also useful in the event that you need to bring your vehicle in for servicing or repair.

Another benefit of the Ghost is that it is unable to transmit or detect radio frequency signals, which makes it inaccessible to thieves who employ RF scanning or code grabbing technology. It also shields your car from key duplicates, ECU swapping and other usual methods of car theft.

No key cloning

Ghost immobilisers are a great option for protecting expensive automobiles and are designed to stop key replication. They stop your car from being started unless a PIN code is entered along with the regular key fob. This makes it extremely difficult for thieves to rob your vehicle, and may deter them from doing it initially. This is a particularly good idea if you’ve spent lots of time and money making your vehicle unique or have a unique or expensive model.

The immobilisers are connected to the vehicle’s onboard CAN data network and are completely hidden which means there is no visible sign of its presence inside the vehicle. It is also impossible for thieves to locate the device using radio frequency scanning or code grabbing technology. This means a thief would have to spend more time to take your vehicle.

To get around the system, a thief must know the unique pin code and the location of the Ghost. But, the pin code is specific to you and may be changed as often as you like. The pin code is easy to remember, but mathematically impossible for anyone else to work out. Additionally the engineer will have provided you with an emergency pin code override in case you forget the pin.

The Ghost CAN bus immobiliser is weatherproof and can be installed in any area of your vehicle. It is compatible with all vehicles and is fully customisable to match the appearance of your vehicle. It is also very cost-effective and simple to use. You can even transfer the device to a different vehicle if you switch cars during the lifetime of ownership, providing that the new vehicle is compatible with it.

The immobiliser for the CAN bus is compatible with many other security features. It can, for example, detect damage to the vehicle and alert the owner. It could also shut down the engine if it detects that the car is being manipulated. The system will protect your vehicle from hacking and key duplication. It also detects vibrations or contact with the vehicle. In addition, it could alert the owner if the vehicle has been moved.

No OBD port hacking

Ghost is a hidden immobiliser module connected to the CAN data network in your vehicle which stops thieves from hacking into your car to disable the alarm, turn off the key fob, and then code new keys. This technology is a major improvement on traditional methods that have been employed by thieves in the past to steal your vehicle. The CAN data network also means that the system won’t be affected by disconnecting or replacing your battery.

The Autowatch Ghost is the first aftermarket CAN bus that is a non-detectable immobiliser that guards against hacking, key-cloning and theft of replica cars. It doesn’t use LED indicators or key fobs. Instead, it utilizes the buttons on your steering wheel, console, and door panels.

Modern thieves employ diagnostics to identify circuit cuts on your vehicle and can bypass immobilisers that require lots of wiring or are incorporated into the wiring. The ghost 2 immobiliser cost is weatherproof and does not require any additional wiring. It is not detected by professional diagnosis tools. It can be used on vehicles with anti-theft devices.

Another benefit of a Ghost immobiliser is that your vehicle is only able to be started by someone who has access to the PIN number and has physical access to your vehicle. This is an advantage over traditional security systems that can be tampered with by simple cable tampering or a screwdriver.

You can easily reset your PIN in case you forget it by using the emergency PIN override feature of mobile phones or computers. This is useful if you are looking to start your vehicle after it has been left in a garage or by using a valet parking service.

The autowatch ghost 2 immobiliser Ghost 2 has been accepted for insurance by TASSA and can be installed by our authorized installers. It comes with a QR fingerprint system to identify specific parts that allows for the return of stolen items if they are found. It can also be set to’service mode’, which allows the engine to start when your car is in a garage, or with valet parking, however, you must enter your PIN code again to exit the car.