Guide To Upvc Window Replacement Hinges: The Intermediate Guide The Steps To Upvc Window Replacement Hinges

Choosing Upvc Window Replacement Hinges

The process of selecting and fitting upvc window replacement hinges isn’t as difficult as you might imagine. It is essential to verify that the arrows on the hinges is facing the right way and also the thickness (13mm or 17mm) of the hinge arm on the opening frame.

There are many different types of hinges to choose from, each with unique features. This article will discuss the most popular uPVC hinges, as well as their advantages.

Egress/Easy Clean Hinge

These windows are an excellent choice to replace or upgrade your fire escape safety window as they open to a full 90-degree angle. They can be disengaged in an easy-cleaning position which allows you to get access to the windows’ exterior without the need to climb ladders or lean over dangerous angles.

These heavy duty egress hinges are manufactured by Yale which is among the most popular and trusted home security brands available today. These hinges can be used with any kind of uPVC side hung window. By pressing a tiny button, the window sash is slid to the side and into the easy-cleaning position. When the window is closed, the sash will revert to its original position.

Both 13mm and 17mm are available. Depending on the size of your existing window we recommend using our Egress Selection Guide to determine which product is best for you.

The hinges are designed to be used in conjunction with a standard side-hung frame that is made of aluminium or uPVC. They come with an easy friction screw that can adjust the amount of resistance that is generated. This makes opening the windows simpler and less likely of closing the window accidentally during high winds. They have been tested for over 30000 cycles and are in compliance with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

Without buttons or catches, There are no buttons or catches. Nico Egress Easy Clean Friction Hinge is simple to operate and provides a simple solution to emergency egress as well as safe cleaning. Press the hinge retention clip located on the inner corner of the bottom corner. This will release both the top and bottom catches allowing you move the sash into the easy-cleaning position. Once in the easy-clean position, close the window to reset the hinges to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges (also known as “Easy Clean”) are used to replace side-opening windows to protect against fire. These types of hinges open wider and faster than conventional hinges to provide a large clear opening for escape in the event of a fire. This type of hinge is legal in any living space with a window as required by building regulations.

They have an exclusive friction stopper that allows the window to open at 90 degrees and also allows the sash opening to slide across when open to make it easy to clean the exterior side of the glass without needing to use ladders. The hinges have no fiddly catch or buttons and are operated with a simple, safe lever that can be accessed from the inside of your home.

The hinges are manufactured in the UK by Cotswold and come complete with a child safety limiter for day to day use that can be reverted with a hidden button giving you peace of thought that your children won’t accidentally open the window too far. The stack heights are 13mm or 17mm.

To purchase these hinges, measure the length of your current side hung window hinge that attaches to the frame (see the guide on measuring your upvc door hinge repairs near me window hinges). Select the proper size hinge from the choices below.

Please note that the measurement is taken from the component that attaches to the frame, not the sash. The actual hinge length may be slightly shorter or larger based on the manufacturer of your old windows. When deciding the size of the double glazing hinge repairs near me, the majority of frames made of upvc can accommodate a stack height of 13mm however if your previous window frame is 17mm, then select this option. You can also install the 4mm packer to make up the difference. All hinges come in pairs (1 left and 1 right). Screws are not included in the hinges. If needed, they can be purchased separately. We recommend using our upvc window hinge repair screws. These screws are designed to improve your hinges’ performance and allow them work efficiently for a longer. They feature a less friction design and an improved weather seal with a new nylon reducer end cap.

Restricted Hinge

Standard hinges can make it difficult to open windows fully. These child safety friction hinges are a great solution to this problem. They can be used when ventilation is required but escaping or cleaning a fire is not possible. They function by limiting the amount that the sash can open and allow the control of this limitation with an option. They are available in 13mm or 17mm stack heights. They are suitable for top and side-hung windows.

The Nico Restricted Egress Friction Hinges combine the advantages of a standard restrictor and a fire escape pivot to provide a simple and effective way to comply with building regulations. It is available in 13mm or 17mm stack heights and is suitable for both top and side opening uPVC window. It comes in two pieces with one hinge being the one that is restricted for egress, and the other being the unrestricted. This lets one hinge be installed at the bottom while the other is set on top.

These uPVC restricting hinges have been tested to BS6375, part 2 and are designed for use on a window that cannot be fully opened like a small child’s bedroom. The mechanism limits how far the sash opens to a safe position of 100mm, and re-engages once the window is shut.

These uPVC friction-type hinges can be used with all types of windows. They are particularly useful for windows that are difficult to reach, such as those in three-storey houses or those that require a ladder. They can be complemented by our security enhancements such as hinge guards and protection plates, or dog bolts for PAS 24 performance.

When replacing a window hinge, it is essential to determine the length of the current hinge so you can get replacements that are comparable in size. The easiest way to do this is to look at the hinge in the gallery and working out the location you would like it to be placed. The top-hung hinges can only be put on one side, while the side hung ones can only be positioned on one side.

Standard Hinge

A standard hinge is made of metal-to-metal contacts and has no additional components to reduce friction. It comes in a variety of finishes and has an NFPA-certified fire rating. To determine the radius of your hinge, lay it flat and line up a dime and quarter in two corners. If the dime fits better and the corner is round by 1/4 inch; if the quarter fits better, it’s rounded by 5/8 inch.

The right hinge can make or break the appearance of your patio door hinges. It’s important to match the style and finish of your door with its hinges for a cohesive design that is both functional and visually attractive.