Check Out What Ghost Immobiliser Problems Tricks Celebs Are Using

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your valuable item from theft. It’s discreet and does not require any additional key fobs.

The device uses buttons on your vehicle (steering wheels doors, door panels, and the centre console) to create a unique pin code sequence that can be changed up to 20 times. This will then allow the start-up of your vehicle.

Simple PIN code Change Process

With the rising rate of vehicle theft, many owners are seeking to improve their security. There are a myriad of security devices that are sold aftermarket, from tracking systems to alarms and immobilisers. However, not all of these are equally effective in protecting your car. While a tracking device can assist you in locating your vehicle in the case of theft, it will not prevent the crime from happening in the first in the first place. An immobiliser, on other hand does exactly what it says on the tin: it shuts down the engine of your car so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to take your car.

Using the existing buttons in your car, the ghost immobiliser and tracker device creates an exclusive sequence that has to be entered before the car’s engine will start. This can be done using the heater, window or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their car without the need to use the button sequence. This option is particularly beneficial if you have to hand your car over to a valet service or parking because the immobiliser is active and not deactivated.

The Ghost is an innovative and unique device that operates with your vehicle’s buttons rather than as a separate unit. It is not only an effective deterrent to theft of your vehicle and vandalism, but it can also be used on any future vehicles you may own. This makes it a better investment than a traditional wheel lock.

Weatherproof tiny device

The Autowatch ghost immobiliser fitting immobiliser is an advanced security device that protects your vehicle from key cloning, hacking & ECU swapping. It is a tiny weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to stop the motor. It can be installed in the vehicle without the need for extra wiring and has been thoroughly tested to ensure it works with all vehicles. It is also immune to jamming devices that are a popular technique that car thieves use to circumvent immobilisers.

The advantage of CAN data over conventional systems is that they operate in a silent manner. It is not able to be detected by sophisticated RF scanning and code-grabbing technologies as well as detected by traditional diagnostic tools. The Autowatch ghost doesn’t produce LED indicators and instead uses the buttons inside your vehicle such as steering wheel, centre console or door panels to create a unique, programmable disarm sequence. You can create a sequence that is as long as 20 presses to provide additional security. The iPhone app allows only one, authenticated connection with a pairing code that is unique to the Ghost and communication between the two devices is encrypted.

The Ghost prevents car thieves adding an ignition key replacement or replacing the ECU in order to bypass the immobiliser. The engine can only be started when a valid PIN code is entered. It is also possible to put it into valet/service mode for a temporary operation (with set parameters such as 30mph speed limit) so that you can hand your car over to a valet service or to be serviced without needing to enter a PIN.

Each vehicle is tested

The Autowatch Ghost is the first aftermarket CAN bus immobiliser that can be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device detects signals to stop your car from operating normally until you enter a custom code. The system can be activated and deactivated through your smartphone’s application without the need for wires.

Standard factory immobilisers for vehicles function by using a transponder inside the key, which sends an electronic signal to the ECU. The car will begin to start if the correct code is transmitted. If, however, the transponder from another vehicle is used instead, the immobiliser doesn’t recognize it. This allows the vehicle start and be stolen. The Ghost immobiliser was created by a South African company at the forefront of vehicle security systems technology. It protects your car from key cloning, hacking and even key theft. Only by physically towing your vehicle away from thieves could they get it, and they would still not be able drive it.

Ghost uses buttons on your vehicle, like the indicator stalk, the steering wheel, and the door panels, to generate unique PIN codes which must be entered in order to use your car. This is done without any additional hardware, like key fobs. It can take up to 20 presses. It is also inaccessible to diagnostics equipment and does not transmit radio frequency signals, so thieves are not able to make use of sophisticated RF scanning or code grabbing technology to determine if security systems have been installed.

Unlike physical anti-theft devices like wheel locks or clamps, Ghost is hidden within the vehicle to ensure that it can’t be removed or disabled by thieves. It is also harder to remove than a car alarm, which requires disarming with the use of a button sequence. This makes it a great addition to an GPS tracking device, which can be used to track your vehicle after it’s been stolen.

Emergency PIN code override

You don’t have to look long on social media sites to find stories or videos of cars that were stolen using the most advanced technology tools. This includes key-cloning and hacking tools that allow you to start your car without the original keys.

Our Ghost immobiliser is designed to combat this and provide you with an additional layer of security to protect your vehicle from being targeted by thieves. It is created by creating a unique pin code push sequence using your existing buttons on the steering wheel, door panel and the center console. This unique PIN is entered alongside your original key fob in order to prevent the engine from getting started. The unique PIN for override can be found on the black card that you will receive following installation. It is simple to remember since there aren’t any LEDs.

The device is hidden in the vehicle’s wiring and does not emit radio signals, so it cannot be identified by modern criminals using diagnostic software that is able to identify the security system you have installed. This makes it a fantastic alternative to the tracking device.

Unlike most other security systems that have an engine relay bay, CANBUS Immobilisers communicate with the vehicle’s ECU and BCM via the CAN data bus (brand dependant). This allows them to disable a vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect a separate analogue immobiliser, alarm or tracker to these systems, however this must be specified before installing the device. They also work with service/valet modes and an excellent alternative to a tracker device when you take your car how to become a autowatch ghost installer the dealer to address an electrical issue.

Service/Valet mode

In recent years, there has seen an increase in the number of cars being stolen with the owners’ keys. With the ease of access to key cloning equipment and door lock pick sets, it is now easier than ever for thieves to steal your pride and joy. To stop this, we are now offering the autowatch ghost installation walsall (visit the site) Ghost immobiliser that prevents your car from being driven even if your keys have been copied or your car has been stolen.

It communicates directly to your cars ECU (Engine Control Unit) via the CAN data circuit. It’s completely silent because it does not utilize radio frequencies or key fobs. This means it cannot be detected by diagnostics or other vehicle hacking devices. It also prevents the addition of an additional key or replacing the ECU to get around the system, since only the correct PIN code will allow the engine to start.

The device is hidden in your car and is accessible via buttons on your steering wheel, centre console and door panels. A unique & changeable PIN code sequence of up to 20 digits has to be entered before you are able to start your car.

This is the first aftermarket CAN bus immobiliser to be developed that can prevent your car being driven away or started in the event that a PIN code hasn’t been entered prior to. If the device is armed and you try to drive off it will display an indicator on your dash which will flash on a regular basis for approximately 300m, if you enter your PIN code at this point, it will disable the anti-hijack system and your vehicle will continue to operate as normal. If you don’t enter your PIN code at this time the indication will continue to flash and require another PIN code for every attempt to start your vehicle.