15 Terms That Everyone Is In The Upvc Window Replacement Hinges Industry Should Know

Choosing Upvc Window Replacement Hinges

It’s not as difficult as it might seem to choose and fit upvc replacement hinges. Check that the arrows on the hinges face the right way and determine the thickness of the hinge arms on the frame that opens (13mm or 17mm).

There are a few different kinds of hinges to pick from, each one with distinctive characteristics. This article will discuss the most commonly used kinds of uPVC window hinges, and their benefits.

Egress/Easy Clean Hinge

These windows are an excellent choice to replace hinges on upvc window or upgrade your fire escape safety windows as they open to a full 90-degree angle. They can also be disengaged into an ‘easy clean’ position so that you can easily reach the outside of windows to clean them without the need to climb a ladder or lean over at potentially hazardous angles.

Yale is one of the most reputable and well-known brands in the world of home security. These hinges are suitable for any kind of uPVC side-hung window. They can be moved into the clean position by pressing in the small button and moving the window sash to one side. Once closed, the window sash will be returned to its original position.

Both 13mm and 17mm are both available. Depending on the size of your existing window, we suggest using our Egress Selection Guide to determine the best product for you.

The hinges are designed to work in conjunction with a standard side-hung frame that is made of aluminium or uPVC. The friction screw is used to adjust the resistance. This makes opening the windows easier and reduces the chances of accidental closing during strong winds. They have been cycle tested to over 30000 cycles and are in compliance with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

Without buttons or catches, There are no buttons or catches. Nico Egress Easy Clean Friction Hinge is simple to operate and offers a practical solution for emergency egress and safe cleaning. First, open the door to the egress (full opening) position and then press the hinge retaining clip that is located on the inner side of the bottom corner. This will open both the catches on the top and bottom allowing you move the sash into the clean position. Close the window once you have the sash in the easy-cleaning position. This will set the hinges back to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges commonly referred to as “Easy Clean” hinges are used to replace side-opening windows to allow escape (fire safety) reasons. These types of window hinges open more wide and faster than normal hinges, allowing an expansive clear opening for escape in the event of a fire. This kind of hinge is required in any living space that has a window, as required by building regulations.

The windows have a friction stay that allows the windows to open up to a 90-degree angle. They also allow the opening sash slide across the glass when opened which allows for easy cleaning without the need to use ladders. The hinges are simple to operate and don’t have complicated buttons or catch mechanisms. They can be operated from the inside of the home using an easy, safe lever.

The hinges, which are manufactured in the UK by Cotswold are fitted with a child safety restriction for daily use. It can be reverted by a hidden button. You will have peace of mind knowing that your children won’t accidentally open the doors too far. They are available in 13mm and 17mm stack heights.

Take a measurement of the length of the side-hung window hinge, which is fixed to the frame. (See the article on measuring the length of upvc window hinges). Choose the right size hinge below.

It is important to note that this measurement is taken from the part of the hinge that connects to the frame and not the sash. The actual length of the hinge could be shorter or longer depending on how to adjust double glazing window hinges your windows were made in the past. Also, when choosing the size of your hinge, most upvc windows will fit a 13mm stack height but should your old frame is 17mm wide, you should select the option that fits this. Alternatively you can fit the 4mm packer to make up the difference. All the hinges are supplied handed (1 left and 1 right). The hinges do not come with screws. If required, these screws can be purchased separately. We recommend using our upvc window hinge repair screws. These screws are designed to increase your hinges’ performance and allow them work effortlessly for a longer. They have a reduced-friction design and an enhanced weather seal that includes a nylon reducer cap.

Restricted Hinge

Standard hinges can make it difficult to open windows completely. These restricted child safety friction hinges can help overcome this issue and offer a fantastic solution for situations where ventilation is required but access to clean up or escape in the event of fire is not possible. They work by restricting the amount of sash that can open and allowing the override of this restriction with a button. They are available in 13mm or 17mm stack heights and are suitable for top and side-hung windows.

The Nico Restricted Egress Friction Hinges blend the benefits of the standard restrictor, as well as an escape pivot to provide a simple but efficient way to meet building regulations. It is available in 13mm or 17mm stack heights and can be used for both side and top opening uPVC window. It is available in two parts, with one hinge being the restricted egress, and the other being the unrestricted. This permits one hinge to be installed at the bottom while the other hinge is placed at the top.

These uPVC hinges are restrictive and have been tested to BS6375, part 2. They are intended to be used on windows that cannot be opened fully like a small children’s bedroom. The mechanism restricts the amount the sash can open up to 100mm for safety and then re-engages when the window hinges near me is closed.

These upvc window hinges types friction-type hinges can be used with all types of windows. They are particularly useful for windows that are hard to reach, such as those in three-storey houses or ones that require the use of a ladder. They can be improved by our security enhancements, like hinge guards, or dog bolts, to achieve PAS 24 performance.

It is essential to measure the hinges on your window to be able to find replacements of the same size. This can be done by looking at the picture gallery of the hinge and deciding the best place to put it. Top-hung hinges are limited on both sides and the side hung hinges are restricted only on one side.

Standard Hinge

A standard hinge is made of metal-to-metal contact, and there are no additional parts to reduce friction. It’s available in a range of finishes and is also fire-rated. For a quick way to determine the radius of your hinge, lay it flat and line up the quarter and dime in two corners. If the dime fits better, the corner is rounded by 1/4 inch; if the quarter fit better, it’s rounded to 5/8 inch.

The right hinge can make or break the appearance of your door. It’s important to match the style and finish of your door to the hinges to create a unified appearance that is both practical and visually attractive.